DC 5V 12V Photodiode Relay Module Light Detection Light-seeking Module Laser Receiver Relay Board

Description: Light detection, brightness detection, through a photopotentiometer in a fixed direction to detect the light in front of the photodiode. For tourists, tourists and tourists). Use a high gain photodiode with an adult relay. 2. The potentiometer is adjustable. Using a sphygmomanometer, the Ampang relay can be adjusted. When the IA is bright at this threshold, the relay module is closed, and when the IA is dark at this threshold, the relay is released. According to ITU, terminal and terminal are Siang Hari terminal and terminal is hybrid.3. Becker Havel voltage 5V4. Output voltage: directly connect to load AC 220V 10A or DC30V 10A5. There are four fixing bolt holes for easy installation. 6. Small board PCB size: 5cm x 2.6cm7. Comparator adopts LM393 wide voltage module Features: 1. Photodiode is used for direct load with relay 2. Power distribution position sensitivity adjustment. Using a sphygmomanometer, the Ampang relay can be adjusted. When the IA bright exceeds this threshold, the Relay module is turned off, and when the IA is dark, the Relay is released, so the IA is normally open, the common terminal is male, and the AWM normally closed is male and 0.3. Becker Havel voltage 12V4. Output diagram: directly connect to the load AC 220V 10A or DC30V 10A5. Hounds6 have 4 bolt holes. Small PCB board size: 5.6cm x 3.4cm7. Use LM393 wide voltage comparator Electrical parameters: Power supply voltage: 12VDC Current: 100mA or more Load: 250V 10A AC or 30V 10A DC Package: 1 optical switch module relay 5V/12V photodiode sensor