Aideepen ESP32-S3-CAM Development Board WiFi Bluetooth Module Onboard ESP32-S3-WROOM-1 N16R8 Module with 2640 Camera

Performance parameters: Xtensa® 32-bit LX7 dual-core processor up to 240 MHz Built-in 512 KB SRAM, 384 KB ROM storage, and support for multiple external SPIs, Dual SPIs, Quad SPIs, Octal SPIs, QPI, OPI flash, and off-chip RAM Additional vector instructions to speed up work such as neural network computation and signal processing 45 programmable GPIOs that support common peripheral interfaces such as SPI, I2S, I2C, PWM, RMT, ADC, UART, SD/MMC host controllers and TWAITM controllers. Wi-Fi • Support IEEE 802.11b/g/n protocol • Supports 20 MHz and 40 MHz bandwidth in the 2.4 GHz band • Supports 1T1R mode with data rates up to 150 Mbps • Wireless Multimedia (WMM)• Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU) Piece of confirmation immediately (Immediate Block ACK), Fragmentation and reorganization (the Fragmentation/defragmentation) • Beacon Automatic Monitoring (hardware TSF) • 4 x virtual Wi-Fi interface • Support for Infrastructure BSS Station mode, SoftAP mode, and Station + SoftAP mode. Please note that SoftAP channels change simultaneously when the ESP32-S3 scans in Station mode • Antenna diversity • 802.11mcFTM Bluetooth: • Low Power Bluetooth (Bluetooth LE) : Bluetooth 5, Bluetoothmesh• High power mode (20 dBm) • Speed support 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps • Advertising Extensions • Multiple Advertisement Sets • Channel Selection Algorithm #2 Wi-Fi and Bluetooth coexist, sharing the same antenna CPU and storage • Xtensa® 32-bit LX7 dual-core processor up to 240MHz • 384 KB ROM • 512 KB SRAM • 16 KB RTCSRAM • 8MB PSRMA Operating voltage: 3V-3.6V Temperature range: -40 to 65℃ Product list:

Package ：1X burner