Súng Phun Sơn 600cc 1.4mm Hvlp

Features: 1.A professional Gravity Feed HVLP(High Volume Low Pressure)Spray Gun with 1.4mm Fluid Tip and Regulator. 2.This spray gun supplies low pressure through the air cap which makes the spraying softer, easily controlled and less overspray in high transfer efficiency. Ideal for spraying basecoats, clearcoats and other high viscosity coatings such as Extreme High Build or Polyester Primers, Thick Enamels, Latex Paints, Chip Guard, Metal Flakes, Gel Coats, Liquid Mask, Etc... 3.Designed to provide equal atomization and partical size for all kinds of surface painting. 4.Stainless steel needle and nozzle accommodate a variety of coatings. 5.Light weight, ergonomic design and easy trigger pivot reduces operating fatigue. 6.Precise 1.4mm stainless steel needle and nozzle set. 7.3 Knobs for full adjustment: Fluid, Pattern and Air Pressure Controls. 8. 600cc Plastic Fluid Cup. 9.By adjusting the pattern adjustment knob and the fluid adjustment knob, it is possible to easily obtain a desired pattern and fine atomization. 10.Pattern adjustment: Rotate the pattern adjustment knob to the right until the spray pattern is rounded or rotated to the left to make the spray pattern oval. 11.Fluid adjustment: Rotate the fluid adjustment knob clockwise to decrease the fluid output and counterclockwise to increase the fluid output. Specifications: Product name: Spray Gun Set Material: Aluminum Color:Blue Size of the spray gun: Approx. 200 x 150mm/7.87" x 5.9" Air Inler: 1/4 NPT or 1/4 BSP Nozzle size: 1.4mm Cup Volume: 600cc Operating Pressure: 50-70PSI Air Consumption: 1.6-4.0 CFM Compressor Required: 2-3HP Package Included: 1 x Spray Gun 1 x 600ml Plastic Cup 1 x Locking air pressure regulator 1 x Wrench 1 x Screws 1 x Brush 1 x Filter 1 x User manual 1 x Box