Suitable for Arduino 38Pin wireless WiFi Bluetooth dual-core ESP32 ESP-32 development board

1. CP2102 stable USB on board to TL chip ensures normal communication of serial port.2. Supports automatic download, no need to change download and operation mode manually.3. Soak the gold craft4. Supports Windows systems (cygwin and msys32 simulation environments) And Linux5 system development. Supporting ESP32-ArduinoESP-WROOM-32 is a universal wi-fi + BT + BLE MCU module with powerful functions and versatility. It can be used in low-power sensor networks and demanding tasks, such as voice encoding, audio streaming, and MP3 decoding, etc. The core of this module is the ESP32-D0WDQ6 *chip, which is scalable and flexible. Both CPU cores can be individually controlled or powered. The clock frequency adjustment range is from 80MHz to 240MHz. Users can cut off CPU power and use a low -power coprocessor to continuously monitor device status changes or whether certain analog quantities exceed a threshold.ESP32 also integrates a variety of equipment, including capacitive touch sensors, hall sensors, low noise sensor amplifiers, SD card interfaces, among Ethernet interfaces, high-speed SDIO/SPI, UART, l2S and I2C, etc.CPU and memory: ESP32-D0WDQ6 built-in two low-power Xtensa 32-bit LX6MCUs. Storage on the chip includes: ● 448KB of ROM, used for program startup and kernel function calls ● 520 KB on the SRAM chip for data storage and instructions ● 8KB of SRAM in the RTC, which is RTC slow memory, can be accessed by the coprocessor in deep sleep mode. ● 8KB SRAM in RTC, i.e. RTC fast memory, can be used for data storage and accessed by main CPU when RTC starts in sleep mode in. ● 1 bit eFuse, of which 256bit is dedicated to system (MAC address and chip settings); The remaining 768 bits are reserved for user applications, including flash encryption and chip ID. ● ESP-WROOM-32 integrates 4MB SPIFlash