Soundcore Motion X500 Portable Bluetooth 5.3 Speaker, Call Wireless Speaker with Immersive Spatial Audio, Wireless Hi-Res Sound with 3X Detail, 3-Channel Audio Speaker

How do I use LDAC?

On a device running Android 8.0 or above, do the following: 1. Open the soundcore app. 2. Go to Settings. 3. Click on Sound Mode. 4. Select Preferred Audio Quality and switch to LDAC codec.

Notes:

It takes about 10 seconds to switch audio codecs. You may be required to update the

speaker's firmware if available. Do not use the app or speaker while updating.

• LDAC provides higher quality sound but increases power consumption and reduces

playtime.

Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.

• Can I change the color of the light on the top of Motion X500?

Yes, you can customize the color of the Sky Light through the soundcore app. The following are the default skylight colors (Note: Light color can be customized in the App)，You can directly access different EQs through the EQ Switch Button. White Light: Spatial Signature EQ Cold White Light: Spatial Dynamic EQ Warm White Light: Bass Boost EQ

• What is TWS and does Motion X500 support it?

TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after pairing up. Motion X500 supports TWS.

• How can I pair two Motion X500 speakers at the same time with TWS?

Method 1 1. Long press the power button to start both speakers. 2. Speaker 1: Hold the Bluetooth button until the button light flashes white. 3. Speaker 2: Hold the Bluetooth button until the button light flashes white. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully. 5. The master speaker is the one with the blue light. 6. Use the master speaker to pair with your device. Method 2 1. Long press the power button to start both speakers. 2. Connect either speaker with your Bluetooth device. 3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

• How can I connect Motion X500 to my laptop?

MacBook: 1. Turn on Bluetooth and find soundcore Motion X500 in the list of available devices. 2. Connect soundcore Motion X500 to your MacBook. 3. Open "Sound" and confirm that soundcore Motion X500 is the default for all sound. If it is not the default, change the settings. Windows Laptops: 1. Turn on Bluetooth and find soundcore Motion X500' in the list of available devices. 2. Connect soundcore Motion X500 to your laptop. 3. Open ''Sound'' and confirm that soundcore Motion X500 is the default for all sound.

• Is Motion X500 waterproof?

Motion X500 is IPX7 waterproof,but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.

• What Bluetooth version does Motion X500 use?

Bluetooth 5.3.

• Which Bluetooth codecs does Motion X500 support?

Motion X500 supports LDAC, SBC, MPEG2, and AAC Bluetooth codecs.