Socket Tester 110‑250v Digital Display Socket Tester Outlet Plug and Measure for Home

 

 1. EASY TO OPERATE: Socket tester plug and measure, provide digital voltage, effectively judge the fault in the circuit, useful and practical
2. LEAKAGE SWITCH PROTECTION DETECTION: Insert the tester into the socket and ensure that RCD is pressed when the display prompt that the wiring is correct. The normal leakage switch will trip at this time. If does not trip, indicate that the leakage switch fail
3. COMPACT AND PORTABLE: Voltage socket checker adopt compact design, easy to carry, whereever to test, provide great convenience for your life and work
4. LARGE SCREEN: The socket tester has a large HD screen to easily read the voltage and clearly display the wiring conditions. The screen allow you to see readings while working in dim or poorly lit conditions, such as electrical cabinets, downstairs, behind appliances, and other enclosed spaces
5. RANGE AND ACCURACY: Voltage socket detector voltage measurement range is 90‑250V/45~65HZ, accuracy +(2.0%+2); Leakage voltage measurement range is 0‑99V/45~65HZ, accuracy +(2.0%+2)

Specification:
Item Type: Socket Tester
Material: ABS
Voltage Measurement Range: 90-250V/45~65HZ, Accuracy: +(2.0%+2)
Leakage Voltage Measurement Range: 0-99V/45~65HZ, Accuracy: +(2.0%+2)
Frequency Range: 45~65Hz
RCD Current: >30mA
Operating Temperature: 0~40℃
Working Humidity: 20%-75%RH
Storage Temperature: -10-50℃
Storage Humidity: 20%~80%RH

How to Use:
Please read the instruction manual carefully before use and strictly follow the safety instructions.
Socket Sequence Test: 
Plug the tester into a standard three hole power outlet. When the socket line sequence error is detected, the indicator light will light up to indicate the wiring error, and then observe the indicator light and the function comparison table, determine what kind of error the socket wiring is, and then unplug the tester. When the wrong wiring is detected, please find a professional electrician to repair the wiring.
Leakage Switch(RCD) Detection: 
Plug the tester into the correctly connected three hole power socket, and the RCD triggering current will be displayed on the display screen. Press the RCD key, and the normal leakage switch will trip. If does not trip, mean that the leakage switch has failed. Please find a professional electrician to repair in time.

Package List:
1 x Socket Tester
1 x User Manual

Note:
To Avoid Possible Electric Shock Or Personal Injury:
1. Before use, please carefully check the tester to confirm if there is any damage. If damaged, please stop using it immediately and send it for repair.
2. Test the accuracy of the tester by inserting it into a known correct socket for testing, and only use it after confirming the testing function is correct.
3. The leakage switch test must be carried out under correct wiring conditions.
4. When testing the leakage switch, please turn off the devices on the power line to ensure that power failure does not cause any harm. In public places, testing must be conducted with permission.
5. If the tester detects incorrect socket wiring, please seek professional electrician assistance for rewiring.
6. The testing time should not exceed 5 minutes.
7. When using, please be careful not to touch the RCD button to avoid unnecessary triggering of the leakage protection switch and causing unnecessary losses.