Smart Apple Homekit House Wall light Switch Wireless WiFi Siri Voice Remote Control Key Interruptor Work With Apple Home kit App

NOTE:

This switch is Neutral Line required design.
Before you buy, please confirm if your House has Neutral Line for this Switch.

Specification:

Type: 1/2 Gang Touch Wi-Fi Switch (EU Standard)
Material: PC V0 fireproof
Rated Voltage: AC 110V-240V, 50Hz/60HZ
Max Load : 600W/Gang
Max. Current: 10A
Wi-Fi: 2.4GHz, IEEE 802.11 b/g/n
App: Apple Homekit
Voice Control: Siri
Support by : IOS
Life Time: 100000 times
Working Temperature: -20℃~50℃
Wireless Power Consumption: <0.3W
Power Supply: Neutral and Live wire
Security mechanism: WPA-PSK/WPA2-PSK

Feature:

A)No Hub required for set up: At anytime anywhere Immediately start controlling your Switch with quick and easy set up using wifi on your compatible Apple iOS device with the Apple Home App,
B)Voice Control with Siri: Control your switch with voice integration through Siri, Ask Siri to turn on or off, and more.
C)Works with Apple HomeKit, No hub required for set up.
D) It works with Apple HomeKit, so you can easily control connected Switch using Siri on your iPhone, iPad, iPod touch, or Apple Watch. No require to install others APP.
E)The intelligent timer switch will automatically turn on after setting a timer for this switch, which is essential for daily scheduling, and bring you a comfortable and intelligent lifestyle

Tips--App

Be sure that you are using 2.4GHz WiFi when connecting with the smart bulb. And WiFi must be detectable status. Many routers have 5 GHz and 2.4 GHz network and your phone will always automatically connect to the 5 GHz network. So, you have to completely turn off your 5 GHz network by going to your router settings (enter the router IP address into your internet browser, usually something like 192.168.1.1), forcing your phone to connect to the 2.4 GHz network.

How to install Homekit Switch to you Apple Home App

Power on the device and use your computer or phone search the WiFi until find Homekit_xxxxx and click to connect, wait several seconds until configuation page pop up.

After you connect it, the configuration web will pop up automatically ( If not, please use your web browser visit IP address: 192.168.4.1 , then choose the WiFi router you want to connect (make sure connect to 2.4G not 5.8G)

Choose your router and input the password, then save

Open Apple Home APP and click + to add accessory, scan the code or choose" I Don't Have a Code or Cannot Scan" to install manually

While Home app find the device click it then press Add Anyway

The device has been successfully installed

Touble Shooting

If add unsuccessfully, press and hold the key more than 8 seconds to reset it.

Then try again until success