【Seasboat】 DC6~30V 20A 1.14 Inch High-voltage Working Multi-function Measuring Instrument High-definition IPS LCD Color Screen 9-in-1 Multi-function Measuring Instrument

technical parameter

Input/output interface: 20A high current 2P terminal

Instrument working voltage: ①XH-2.54-2P red and black wires, independent power supply DC6~30V ②Common power supply DC6~120V

Voltage measurement range: DC0~120V

Current measurement range: 0.00A~20.00A

Capacity measurement range: 0~9999.99Ah

Electricity metering range: 0~9999.99Wh

Impedance measurement range: 0~9999.99Ω

Temperature measurement range: 0~99℃

Time measurement range: 0~999:59:59 (hour:minute:second)

Data reset: support

No-load return to zero: support

Voltage fine-tuning: support

Current trimming: support

Percentage power display: Supports percentage power based on voltage reference (full power and no power voltage need to be manually set)

Product size: 47.59×28.67×25.33mm

Installation hole: 45×26mm

Product weight: 26g

XH-2.54-2P red and black wires

Thin red wire: positive power supply

Thin black wire: Negative, and thick black wire construction site, do not need to connect when measuring loop current

This wire is only used as an independent power supply when measuring voltages below 6V, and it is not necessary to connect this wire when measuring voltages above 6V.

System menu entry and setting method

1. Enter the system menu

In the general interface, long press "⑩ button 1" for three seconds to enter the system menu, and then click "⑩ button 1" to switch the menu after entering the system with the order, and click "⑪ button 2" to confirm.

2, 03, 04, 05, 06 menu parameter adjustment

Click or long press "⑪ button 2" under the 03-06 menu to increase the parameter value; long press "⑩ button 1" to decrease the parameter value.

3. Battery percentage parameter setting

Displaying the reference power requires setting the battery low voltage and full battery voltage to display the accurate reference power. For example, if the low battery voltage is 9.6V and the full voltage is 13.6V, then you need to set 05.V-LOW: 9.6V and 0.6 V-FULL: 13.6V.

Shipping list:

Measuring instrument X1

Wire X1