• MTBF:1,500,000 hours
• Max Sequential Write:2900Mbps
• Max Sequential Read:3300Mbps
• Transport Protocol:NVME
• Bus Type:PCIe 3.0x4
• RGB:no
• Cooling Fin:Yes
• Package:Yes
• Nand Flash Type:TLC
• Controller:other
• Size:M.2 2280
• Inter Type:PCI Express,M.2 2280
• Application:Desktop,Laptop,Server,Workstation,Industrial Computer
• Origin:Mainland
• Type:Internal
• Style:SSD
• Certification:CE,FCC,RoHS
• Warranty:5 year
• Nand Flash:Micron B47R

Reletech m2 ssd NVMe 500g 1tb SSD m.2 2280 PCIe SSD PHISON Controller Internal Solid State Drive Disk Laptop Noteboook Desktop

In order to achieve optimal speed, the motherboard must support and work in PCIe Gen 3.0 x 4 mode; if the motherboard does not support   PCIe 3.0 and above, or the motherboard works in PCIe Gen 3.0 x 2 mode, the optimal speedcannot be achieved.

Notebooks with too old production years may not reach the specified speed. Notebooks with a relatively new production year and  supporting PCIE3.0X4 are required to better reach the specified speed.

Desktop motherboards recommend using B350/B360/B450 or higher configuration motherboards to achieve the specified speed. You can use the CrystalDiskInfo software to test whether your motherboard meets PCIE3.0X4.

Note: Using an external adapter may cause unrecognition or the speed cannot reach the specified situation. Therefore, it is not recommended to use an external adapter to connect to the SSD. Buyers who use an external adapter should purchase with caution. Therefore, the unusable problem caused by the external adapter is not a problem of the SSD product itself.
If the notebook cannot use the built-in M.2 SSD, you can buy our external solid state drive

Controller: 500GB(PHISON E15T）、1000GB/2000GB（MAP1202)

Flash type: Micron/TMTC

512GB : Read (max) up to 3,300MB/s / Write (max.) up to 2,300MB/s

1TB：Read (max) up to 3,300MB/s / Write (max.) up to 2,900MB/s

2TB：Read (max) up to 3,300MB/s / Write (max.) up to 2,900MB/s

The speed test is based on the 64-bit version of CrystalDiskMark 6.0, 1GB range, which will fluctuate depending on the configuration, for reference only

Mean Time Between Failure (MTBF): 1,500,000 hours

About Capacity:

Flash memory vendors are using decimal arithmetic:1MB = 1000KB,1G = 1000MB calculated, the operating using binary arithmetic:1MB = 1024KB,1GB = 1024MB; so such as there are some differences between display capacity and nominal capacity of flash memory product 32gb is about 28.8gb; 64gb is about 59.5gb; 128gb is about 119gb As we are factory and we use 1000KB=1MB for easy calculate, also we use a little space as the Bad Bolck Management software for SSD's stable using, the real capacity will be: Capacity x 0.93