Opener Remote Control Duplicator Cloning Code Car Key Security Alarm Wireless Multi-functional Gate 433mhz Door Remote Control Garage

Description:
Name: remote control

Material: plastic.
Color: as shown in the picture.
Type: wireless remote control.
Rated voltage: 12V 27A battery (included).
Wireless transmission distance: 50-150 (m), (open space).
Clone chip type: 2260 (PT2260, SC2260, LX2260, HX2260) 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527(EV1527,HS1527,HX1527) FP527, CS521AX5, 5SMC2607, 5SMC3261 HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630, etc. Different chip manufacturers have different chip model prefixes, as long as the digital part of the chip is of the same model number.
Use step:
1. Clear the code: press and hold the unlock button and lock button with two fingers at the same time; the LED flashes quickly 3 times in about 2 seconds; release one of the fingers (don't release the other hand), then click the release button quickly with the released finger 3 times until the LED flashes quickly; two fingers can be released; then press a button on the remote control; when the LED goes off, it means the code pair is successful (all four keys are empty); if the light is still on after pressing any key on the remote control, it means the original code has not been cleared successfully. You need to clear it again, only when the code is cleared successfully can you clone it successfully. You can repeatedly clear and clone the code.
2. Copy: hold the original remote control in your left hand, hold our cloned remote control in your right hand, two remotes as close as possible; at the same time on the first key of the two remotes; about 2 seconds later, the LED light will flash quickly 2 times; after one second, the light continues to flash, release your finger; press the key after successful learning, the light is always on, indicating that the first key code of the original remote control has been copied to the other remote control; the same method can be opened in turn the second key, the third key ...... if the copy is successful, the remote control functions the same as the original matching remote control.
3. Recovery: When you accidentally clear the copy code of the remote control, you can press the bottom two keys of the remote control to copy at the same time, LED flashing fast, press any key and then release, long light, this means that the remote control code has been recovered. Be sure to check the existing code of the remote control before using our copy remote control.

Packing list:
1 x 433MHZ remote control
1 x packing bag

Note: 
We usually do not recommend copying the scrolling code chip because there are many uncertainties in copying the scrolling code chip. When copying the scrolling code remote control chip, it is impossible to judge whether the original remote control chip is an encrypted chip. Therefore, we recommend copying the rolling code remote control.