_ePLA is a PLA material with high cost-effective ,environment-friendly,Easy to print.
_Compared with ABS, ePLA has higher rigidity and strength similar to PC, no need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model;
_Compared with other materials, the support is easier to remove from the model, and the surface of the printed model is smooth and flat;
_No pungent smell when printing, safe and environmental friendly;
_The spool is made of plastic injection molding based on production waste and industrial waste such as PETG, ABS and PLA.
_The outer box is made of recyclable paper box.
_The concept of environmental friendly makes 3D printing more sustainable.
_Shinny and smooth surface;
_The filament is hard to break, long time printing smooth without plug, can be used for conceptual model, rapid prototyping.
+Green and environment-friendly
+High cost -effective
+High speed printing
+The support is easy to remove
+Easy to print
+Hard to break
_Filament Properties Table
+3D PRINTING FILAMENT ePLA-Gloss
+Density(g/cm3) 1.26
+Heat Distortion Temp(℃,0.45MPa) 56.70
+Melt Flow Index(g/10min) 3.3(190℃/2.16kg)
+Tensile Strength(MPa) 64.51
+Elongation at Break(%) 31.54
+Flexural Strength(MPa) 68.99
+Flexural Modulus(MPa) 1514.78
+IZOD Impact Strength(kJ/㎡) 7.9
+Durability 4/10
+Printability 9/10
_Recommended printing parameters
+Extruder Temperature(℃) 190 – 230℃
+Recommended temperature:210℃
+Bed temperature(℃) 60°C
+Fan Speed 100%
+Printing Speed 40 – 100mm/s
+Heated Bed Optional
+Recommended Build Surfaces Masking paper, PVP solid glue, PEI
** To get more support on Price and Product Information, please contact:
091.3939.775 meet Mr.Quan(for English)
094.144.0951 meet Mr.Quynh
** Price does not include VAT (+ 10% if VAT invoice is issued)
Model printed from ePLA-Gloss Yellow