KKmol DC6-60V DC PWM Motor Speed Regulator Power Controller with LED Digital Display Slow Start/Stop Revolving Speed Time Adjustable

Parameters:

Input voltage: DC6-60V

Output voltage: linear under load

Output current: 0-30A

Continuous current: within 20A

Speed regulation type: current regulation

Speed regulation method: jog+-

Speed regulation range: 0-100%

Control frequency: 21KHZ

Wiring type: fence type terminal blocks

Supporting motor: DC brush motor

Length * width * height module size: 96mm * 61mm * 34mm

Length * width panel opening: 92mm * 56mm

Speed digital display: percentage 0-100

Setting instructions:

The slow start time setting function is adjustable from 0 to 10 seconds, with a default speed of 1 second, from 1000 to 100%.

The slow stop time setting function is adjustable from 0 to 10 seconds between 2000 and 100 seconds, with a default of 1 second.

The lower speed limit setting function is adjustable from 0 to 80% for a minimum speed of 3:000 to 080, and is less than the maximum speed setting value. The default is 0.

The upper speed limit setting function is adjustable from 0 to 100% for a maximum speed of 4:000 to 100%, and is greater than the minimum speed setting value. The default is 100%.

Acceleration and deceleration value setting function 5:001 002 005 010 015 020 025: Each press of the acceleration and deceleration key changes the speed accordingly by 1%, 2%, 5%, 10%, 15%, 20%, and 25%

Attention:

The input voltage must be divided into positive and negative, and 220V cannot be input. The input voltage must be equal to the rated voltage of the motor within 6-60V.

Package include:

Module X1