Handheld RFID ID Card Copier Reader Writer 6 Writable Tags Cards 125Khz Durable ABS

Decription: Features: 1.Portable 125KHz RFID ID Card writer/copier. 2.Handheld shape design, comfortable hand feeling. 3.Built-in buzzer and LED. 4.Application: You can copy all ID cards, such as access cards, mobile cards, parking cards, etc. 5.This device is used to clone 125Khz FRID cards. It can copy 125 Khz EM4100 / EM410X card / tag ID for backup. 6.Only supports 125Khz EM4100 / EM410X or compatible card / label format (HID standard is not compatible!),so that the device module can be referenced at work. It is very easy to use. Specification: Material: ABS Distance: ≤25mm (keychain), ≤60mm (card) Supported blank labels: T5557, EM4305. Working frequency: 125Khz Power: Two AAA batteries for 20,000 times. (Excluding batteries) Working status Led: read, power, write Button: Read button, write button How to clone: 1.Press the power switch on the right side of the device, it will stay two or three times, and the LED lights up to mean it works, if not restart. 2.Place another card near the antenna on the left side of the device, then press the READ button, the device will remain and the LED will be on when the reading is successful. If you make 2 beeps, go to step 3, if 3 beeps are sounded. Go to step 4, click if you don’t make a beep, read again 3.Change the new blank card to T5557 / EM4305, then press the WRITE button. When the beep PASS LED is lit, the average clone is successful. If there is no beep, please light it again. 4.Change the blank T5557, then press the WRITE button. When the beep PASS LED is lit, the average clone is successful. If there is no beep, please light it again. 5.If you want to make more of the same ID card, repeat step 3 or step 4. 6.Turn off to save power. Included: 1 x Handle RFID Writer (Batteries are not included) 6 x Keychain can be copied 6 x Cards