Fluke 175, 177, 179 multimeter display
reminder:
1、 First screw out the four screws on the back of the circuit board
2、 Remove the screen holder
3、 Then install the screen
4、 Fasten the plastic fastener on the screen
5、 Finally, fit the screen frame with the circuit board, screw in four screws and install it back into the shell
Installation instructions:
1. Before installation, all contact electrodes should be thoroughly cleaned with anhydrous alcohol, and the new display screen should also be cleaned.
2. LCD screen is fragile, so attention must be paid when installing






![【Eelhoe】 Vỏ màu đỏ cam điều khiển sạc năng lượng mặt trời 12V 24V để thiết lập quang điện [phát hành sản phẩm mới] [hàng tồn kho Lớn]](https://sg-test-11.slatic.net/p/29b233bcf619cb12293e0bfdec965e91.jpg)











