Floor Acrylic Polish Q-GLOSS - 4 liter can - AVCOchem - Q-SPEC

Q-GLOSS is a high performance acrylic chemical designed to provide floors with a good and durable glossy finish at reasonable costs. The film provided by Q-GLOSS is clear, flexible and tough. The coating is also highly resistant to dirt, scratches, black heel marking, wearing, water and chemical. It is a special coating for floor substance such as PVC, vinyl, epoxy and wood. It is additionally ideal for maintenance – surface marks easily removed, recoated and repaired.

Main applications: Q-GLOSS is for use on all resilient and non-resilient floor, vinyl, vinyl asbestos, sphalt rubber tile etc. as well as terrazzo, marble, quarry tile, concrete and sealed wood floor. For industrial, commercial and household applications.

Directions for use: Just follow these steps:

Strip the old gloss finish using Q-FLOOR STRIPPER and thoroughly clean the floor and let it completely dry. Make sure the stripped floor is free of the old acrylic finish and the residue of the stripper alkaline.

Apply one or two coats of Q-GLOSS with specialized applicator mop evenly to the dry floor surface, allowing each coat to dry before applying the next (min. 30 minutes between each coat). Please note each coat needs to create only a very fine and thin film on the surface. Coated floors to be in use best after 4-5 hours afterwards.

Storage: store in dry, cool, well-ventilated area. Avoid exposure to sunlight and prolonged heat sources. Close container tightly after each use.