7RYMS Condenser USB Microphone SR-AU01-K2 Studio Microphone Kit with Desk Stand, Pop Filter and Real-time Monitor Gaming-Mic 192kHz/24bit Tape to Mute Microphone for PC for Streaming Podcast Recording ASMR, for Computer, Phone

Main Features

1.16mm Condenser Cardioid Pattern Mic for Professional Studio Quality

16mm professional condenser microphone, high quality and large dynamic range

2.USB-C Digital Output, 192kHz/24bit Audio Recording, Intelligent Denoise

High sampling rate for better picking up high and low frequency audio signals, high sound reproduction

3.Zero-latency Monitoring and Muting Functions

Real-time monitoring to ensure that the microphone works efficiently and stably; Muting function to handle streaming/recording and other on-site emergencies

4.Preamp Amplifier and Gain Control

The microphone output gain and headphone monitoring volume can be adjusted freely according to your shooting needs

5.Built-in Sound Card, Support All Systems of Computer and Phone

Wide compatibility for devices with Windows, MacOS, Android and iOS system

6.Equipped with Desktop Mic Stand, Flexible Extension and Combination

Two metal thread joints of the desktop mic stand, which can be used freely with other corresponding accessories

7.Equipped with 4.8 Inch Double-layer Mask Shield to Effectively Filter Airflow

Exquisite double-layer mesh design can effectively banish the dreaded hissing and lisping sounds

8.Professional Shock-mount and Windscreen, Effectively Filter the Noise

Professional shock-mount and high-density windscreen can effectively filter noises such as vibration noise and wind noise

9.Full Metal Material, Stable and Durable

Metal material can shield external signal interference, stable and durable

Specifications

Polar Pattern：Cardioid Pattern

Sensitivity：-37dB±2dB

Frequency Response：20Hz ~ 20kHz

Maximum SPL：120dB

S/N：70dB

Equivalent Noise：24dBA

Dynamic Range：96dB

Sampling Rate：48kHz

Bit Depth：24-bit

Output Port：USB-C

Monitoring Port：3.5mm TRS/TRRS

Weight：233g

Dimension：48 x 52 x 157mm

Microphone installation steps

1. Put the windscreen to the microphone
2. Connect the screw thread of the microphone to the screw hole of the shock-mount, and fix the microphone by adjusting the locking screw of the shock-mount
3. Connect the screw thread of the stand to the screw hole of the round base, and turn clockwise to tighten and fix; Adjust the height of it through the fixing screw knob on the stand
4. Connect the 3/8 threaded hole of the shock-mount to the thread of the desktop mic stand, turn clockwise to tighten and fix; Adjust and fix the shock-mount and the microphone through the locking screw on the shock-mount
5. Clamp the pop filter on the desktop mic stand and tighten the fixing clip clockwise to fix the pop filter

Tips

When used in computer, please follow the steps below:

① Connect SR-AU01 to the computer

② Click sound setting and set the "7Ryms_SR-AU01" as the input and output device

Packing list

1. Microphone

2. Shock-mount

3. Windscreen

4. 2 in 1 Audio Cable

5. User Manual

6. Warranty Card

Microphone boom