【Seasboat】 W1088 Dual LED Digital Temperature Sensor Meter Controller Electric Heating Thermostat 12V/24V/110-220V Aquarium Incubator Thermoregulator

How to set the heating mode:

1. Long press. Up button, the startup temperature flashes, and the startup temperature value is set by the up and down buttons

2. Long press the adjustment button to stop the temperature flashing, and set the stop temperature value through the up and down buttons

Use Cases:

Control the water heater, stop heating to 65°C, and start heating again when the temperature drops to 50°C, how to set it?

Step 1: Determine the working mode as heating mode, start temperature < stop temperature

Step 2: Press and hold the up button, the startup temperature will flash, and set the startup temperature to 50°C through the up and down buttons

Step 3: Press and hold the adjustment button to stop the temperature flashing, set the stop temperature to 65°C through the up and down buttons, and the setting is complete!.

Cooling mode setting method:

1. Long press. Up button, the startup temperature flashes, and the startup temperature value is set by the up and down buttons

2. Long press the adjustment button to stop the temperature flashing, and set the stop temperature value through the up and down buttons

Use Cases:

Control the farm, stop the ventilation to 26°C, and start the cooling again when the temperature rises to 28°C. How to set it?

Step 1: Make sure the working mode is cooling mode, start temperature > stop temperature

Step 2: Press and hold the up button, the startup temperature will flash, and set the startup temperature to 28°C through the up and down buttons

Step 3: Press and hold the adjustment button to stop the temperature flashing, set the stop temperature to 26°C through the up and down buttons, and the setting is complete!

Package includes:

1*Digital display intelligent temperature dual controller