Mythic Stain Remover 240SC (100ml / bottle) - BASF Germany

MYTHIC DRYER 240SC
DESCRIPTION

Bottle of 100ml, 1 liter

INGREDIENT

Chlorfenapyr .......... 240 g / l

Additive ............. just enough 1 liter

USER MANUAL

HOW TO USE MYTHIC TRANSLATION 240SC PURPOSE
The solution contains 0.125% active ingredient. Mix 6 ml of Mythic 240SC in 1 liter of water. Periodic treatment for termites and for low pressure areas.
The solution contains 0.25% active ingredient. Mix evenly 12 ml of Mythic 240SC in 1 liter of water. Dealing with construction works and when there are harmful.
HANDLING PREVIOUS / BUILDING
Horizontal treatment:
Spray Mythic 240SC over all surfaces before pouring concrete with a low pressure nozzle (<25 PSI). Dose: 5 liters solution / m2.

Vertical treatment:
Sprinkle along the foot of the nail, pile buried, foot wall, ... Dose: 2 liters Mythic 240SC solution per meter.

Handling protection around:
Immediately after complete leveling, irrigate 30cm deep around the campus construction. Dosage: 2 liters of Mythic 240SC solution per meter.

HANDLING CONSTRUCTION WORKSHEET
Easily accessible locations:
Digging 15 cm deep along the foundation, around the buried piles, the momentum, ...
Spray 2 liters of Mythic 240SC solution per meter along the groove.
Handles both the inside and outside of the foundation, around all buried piles, pipes, ...
Upon detecting a termination loop, demolish, and irrigate Mythic 240SC (5 liters / m2) within a radius of 50 cm from the detection point.

Hard to access & difficult to use: use one of the following two methods
Spray Mythic 240SC on the entire surface (5 liters / m2), extend the spray if necessary for too narrow.
Drill holes through the ground, spaced 40 cm (about 9 holes / m2), pumped solution Mythic 240SC into the hole (5 liters / m2)

Brand information:
Products of BASF B.V.Amhem (NL) Zurich Branch, Im Tiergarten 7, 8055 Zurich, Switzerland

Distributor registration in Vietnam: BASF Vietnam Co., Ltd
Distributed by Hop Tri Investment Joint Stock Company