RCYAGO Máy Đo Độ Axit Để Bàn PHS-3C Máy Kiểm Tra Độ PH Kỹ Thuật Số 2 Trong 1 PH/Nhiệt Độ Máy Phân Tích Chất Lượng Nước Trong Phòng Thí Nghiệm Hiệu Chuẩn Tự Động

Reminder :

Dear, pay on November 11th, we will deliver 4.01/6.86/9.18 3 packs of powder, as a gift, we now have a variety of coupons that can be used in conjunction with the purchase, you can now buy more and follow the store to receive Coupons, add the product to the shopping cart, pay on November 11, the price will be more favorable. Since the products in overseas warehouses are prepared in advance, gifts cannot be delivered. Of course, we promise to provide better services in the future.

PHS-3C desktop automatic calibration acidity meter

The PHS-3C pH meter is a portable microprocessor-based pH/mV/temperature meter. The handy key board for the selection of the various functions. The possibility of automatically correcting errors in measurement due to temperature and the extreme simplicity of regulation all serve to permit a rapid and reliable execution of calibration and measurement.The display on the front panel reveals the temperature pH or mV readings taken by the instrument. The instrument comes supplied with a combined pH electron and a probe for the measurement and compensation of the temperature.

Technical Specification ：

1.Range: PH: 0.00-14.00PH Temp: 0-100℃ 2.Resolution ： РH: 0.01PH Temp: 0.1℃ 3.Accuracy： PH: ±0.02PH Temp: ±0.5℃ 4.Display： PH: 4-digital LED Temp: 3-digital LED 5.Automatic Temperature Compensation:0℃-50℃ 6.Power Supply: In Label 7.Operating Temperature: 0℃-50℃ 8.Calibration: 2 points with auto bufferrecognition

Operation：

1. Connecting AC power supply. Turn on the meter by"ON-OEF" switch located back ofthe instrumen 2.Connect the electrode to the iack back of the instrument 3.Remove the protective cap of electrode. Put the electrode into the measured solution to be tested.

pH CALIBRATION

1.Pour asmall quantity of pH6.86. pH4.00 and oH9.18 solution into clean beakers. 2.For a particularly accurate calibration, itis advised to use two beakers for each buffer solution; the first is to be used forrinsing the electrode, the second is to be used for the calibration. In this way, the risks of contaminating the buffer solution are reduced to a minimum 3.Switch on the instrument. 4.lmmerse the electrode in a pH6.86 buffer solution, and gently shake it until the reading to stabilize 5.Press the button "CAL" until the calibration Indicator is light.Then press "PH7" until the display shows "6.86". Rinse the electrode with distilled water. 6.lmmerse the electrode in a pH 4.00 buffer solution, and gently shake it until the reading to stabilize 7.Press the button "CAL" until the calibration Indicator is light.Then press "PH4" until the display shows "4,00". Rinse the electrode with distilled water. 8.lmmerse the electrode in a PH9.18 buffer solution. Waiting for the reading to stabilize until the display reading exact 9.18. 9.The calibration of the instrument's pH range is now complete

Packing list

1*PHS-3C meter, 1*temperature probe, 1*PH probe, 1*manual book, 1*hanging bracket, 1*plug, 1*box