【Ready Stock】Original Aideepen WF5V/WF36V WIFI Mobile Phone Remote Control Relay Module

Product selling point
1: Widely used
2: The system built with advanced architecture technology supports tens of millions of users concurrently, the system is stable, and the speed is fast!
3: Timing/delay/loop/self-locking/sharing
4: Support Tmall Elf, Xiaodu voice. Support remote firmware upgrade
5: Convenient and convenient

Connecting steps:
step 1
During the pairing process, the WIFI network must be 2.4G, and the 5G network cannot be paired. (If your WIFI router 2.4G and 5G are network merged, please reconfigure the router, separate it, and select 2.4G network)
Second step
The product enters the Touch pairing mode by default when it is powered on.
Step 3 Click "Start Connection""
Touch mode: The blue light flashes 3 times quickly, wait 1 second, and flash 3 times again quickly
So back and forth.
AP mode: The blue light continues to flash quickly.
Note: After the product is powered on, it will enter the Touch pairing mode by default. If the pairing fails,
Please follow the instructions of the APP.

Product selling point
1: Widely used
2: The system built with advanced architecture technology supports tens of millions of users concurrently, the system is stable, and the speed is fast!
3: Timing/delay/loop/self-locking/sharing
4: Support Tmall Elf, Xiaodu voice. Support remote firmware upgrade
5: Convenient and convenient

Connecting steps:
step 1
During the pairing process, the WIFI network must be 2.4G, and the 5G network cannot be paired. (If your WIFI router 2.4G and 5G are network merged, please reconfigure the router, separate it, and select 2.4G network)

Second step
The product enters the Touch pairing mode by default when it is powered on.

Step 3 Click "Start Connection""
Touch mode: The blue light flashes 3 times quickly, wait 1 second, and flash 3 times again quickly
So back and forth.
AP mode: The blue light continues to flash quickly.
Note: After the product is powered on, it will enter the Touch pairing mode by default. If the pairing fails,
Please follow the instructions of the APP.