👍High Quality👍Hydrogen Generator Water Bottle/Wassergenerator Wasserflasche

The most accurate keywords: Hydrogen Generator Water Bottle/Wassergenerator Wasserflasche/水素発生器ウォーターボトル

Title: PEM technology, SPE ion membrane hydrogen-rich water cup, negative ion hea-lth cup, hydrogen and oxygen separation electrolysis water cup

Five key points:

[Three minutes of high-speed electrolysis]: using platinum titanium electrode sheets, with PEM technology, the hydrogen content of 1300ppb after 3 minutes of electrolysis; the hydrogen content of up to 1470ppb after 10 minutes of electrolysis.

[Common cold and hot water]: It is recommended that cold and hot water below 122°F (50°C) be suitable for purified water/mineral water/boiled water/distilled water; high-concentration hydrogen production, non-toxic and tasteless, five cups of hydrogen water per day, so that young people can stay .

[Large-capacity one-key electrolysis]: Platinum titanium electrolysis ring, large-capacity lithium ba-ttery, corrosion resistance, long life, energy saving and no secondary pollution

[Intelligent LDE display]: It can display the batt-ery power, press and hold for 3 seconds to turn on the power, you can choose 3/6min electrolysis, and each stage of electrolysis can display the hydrogen content.

[Gift Nano Spray Water Replenisher]: Blue light spray treats the skin, one-button control of the concentration of hydrogen; the water replenisher can only use electrolyzed hydrogen. It is used to restore the body's he-alth, slow down wrinkles, improve the intestines and stomach, promote metabolism, and enhance immunity.

[Absorbable hydrogen]: Comes with a hydrogen absorption tube, which can quickly absorb hydrogen after electrolysis, which is helpful for he-alth preservation.

Big description:

Bottle material: high-density glass

Lid material: high hardness aluminum alloy

Electrode material: platinum titanium + SPE ion membrane

Electrolysis light: colorful light effect

Hydrogen concentration: 1200ppb-1400+ppb

Potential value: -650-0mv

Hydrogen concentration: electrolysis once, can reach 1000ppb-1200ppb

Multiple electrolysis, can reach 1200ppb-1400ppb

Electrolyzed water temperature: recommended below 122°F (50°C)

Charging time of hydrogen suction cup: 1-2H

Charging time of the sprayer: 0.5-1H (about 1H when fully charged)

Number of electrolysis: 15 times (under full power)

Cup lid color: gold/silver

Style: Z model

Capacity: 400ml

Display: LDE smart screen

Size: 68mm*68mm*245mm

Steps:

Step 1: Short touch the power button, the screen will display power. Touch the button for 2 seconds, the light will light up, and the bottle will start working for 3 minutes

Step 2: Electrolysis mode

1. Press the button for 2 seconds, the LED light is on, and the screen displays the working mode for 3 minutes;

2. Press the button for 2 seconds, the LED light will be on, the screen will display the working mode for 3 minutes, press the button again soon, the screen will display the working mode for 6 minutes;

3. Hydrogen content display: 500ppb after working for 1 minute, 1000ppb after working for 2 minutes, 1300ppb after working for 3 minutes, and 1400ppb after working for 6 minutes. 200ppb range).

Step 3: After the electrolysis process is completed, the bottom of the bottle will beep and the screen will stop flashing.

Step 4: If you need to stop working halfway, please press the switch button. The LED light will go out and the bottle will stop electrolyzing.

Maintenance and precautions:

1. Please charge correctly, turn off the charger when the power is full.

2. Please put the bottle in a dry place without sunlight.

3. Keep the bottle away from the fire. Do not heat in a microwave oven, electric kettle, electric cooker, thermos, etc.

4. Do not use volatile solvents such as detergent to clean the glass wall of the bottle.

5. Except for drinking water, do not put drinks in bottles.

6. Do not dismantle the structure without professionals.

7. If you find that the bubbles become less after working for a period of time. The bottom may be impurities after electrolysis. Put the vinegar into the base, pour the vinegar for about 2 hours, and then wash it with drinking water

8. If the bottle is dry and there is no water in it, do not turn it on/off. This operation can easily damage the base and cannot work.

9. If the bottle cannot work after opening/closing, the bottle cannot work. Please charge the bottle and wait at least 5 minutes.

10. The quality of the water source must be drinking water/pure water/mineral water/boiled water/distilled water

packing list:

Smart LED Hydrogen Suction Cup Type Z*1

Nano beauty spray moisturizer *1

Hydrogen suction tube*1

Mineral water hydrogen absorption adapter*1

USB charging cable*1

Exquisite gift box*1

English manual*1

最准确关键词:Hydrogen Generator Water Bottle/Wassergenerator Wasserflasche/水素発生器ウォーターボトル

标题:PEM技术，SPE离子膜富氢水杯负离子养生杯氢氧分离电解水素水杯

五点要点:

【三分钟高速电解】：采用铂金钛电极片，附加PEM技术，电解3分钟以后含氢值1300ppb；电解10分钟以上含氢值高达1470ppb.

【冷热水通用】：建议122°F(50℃)以下冷热水，适合纯净水/矿物质水/白开水/蒸馏水；高浓度制氢，无毒无味,每天五杯水素水，让年轻停留.

【大容量一键电解】：铂金钛电解环，大容量锂电池，耐腐蚀，寿命长，节能且无二次污染

【智能LDE显示屏】：可显示电池电量，长按3秒开启电源，可选择3/6min电解，每阶段性电解可显示含氢量.

【赠送纳米喷雾补水仪】：蓝光喷雾处理肌肤，一键控制浓度水素；补水仪只能使用电解后的水素。用于恢复机体健康，减缓皱纹，改善肠胃，促进新陈代谢，增强免疫力.

【可吸氢】：自带吸氢管，可以快速吸收电解后氢气，有助于养生.

大描述:

瓶身材质：高密度玻璃

杯盖材质：高硬度铝合金

电极材质：铂金钛+SPE离子膜

电解灯光：七彩光效

氢浓度：1200ppb-1400+ppb

电位值：-650-0mv

氢气浓度：电解1次，可达到1000ppb-1200ppb

多次电解，可达到1200ppb-1400ppb

电解水温：建议122°F(50℃)以下

吸氢杯充电时间：1-2H

喷雾仪充电时间：0.5-1H（满电可持续使用1H左右）

电解次数：15次(满电情况下)

杯盖颜色：金色/银色

款式：T型号

容量：400ml

显示屏：LDE智能屏

尺寸：68mm*68mm*245mm

操作步骤：

步骤一：短触电源按钮，屏幕将显示电源。触摸按钮2秒钟，灯会亮起，瓶子开始工作3分钟

步骤二：电解模式

1. 按下按钮2秒，LED灯亮，屏幕显示3分钟工作模式；

2. 按钮2秒，LED灯亮，屏幕显示3分钟工作模式，不久再按按钮，屏幕显示6分钟工作模式；

3. 氢气含量显示：工作1分钟后显示500ppb，工作2分钟后显示1000ppb，工作3分钟后显示 1300ppb，工作6分钟后显示1400ppb，(氢浓度显示只是即时数据的参考，最终的结果将有大约 200ppb的范围).

步骤三：电解过程完成后，瓶底将发出哔哔声，屏幕停止闪烁.

步骤四：如需要中途停止工作，请按下开关按钮。LED灯将熄灭，瓶停止电解.

维护保养及注意事项：

1. 请正确充电，电源满时关闭充电器。

2. 请把瓶子放在干燥、没有阳光的地方。

3. 让瓶子远离火。不要在微波炉、电水壶、电动炊具、保温瓶等中加热。

4. 不要用洗涤剂等挥发性溶剂清洗瓶玻璃壁。

5. 除了饮用水外，不要把饮料放在瓶子里。

6. 没有专业人员请勿要拆除结构。

7. 如果发现气泡在工作一段时间后变少。底部可能是电解后的杂质。请将醋放入底座，倒入醋约2小时，然后用饮用水清洗即可

8. 如果瓶子干燥且里面没有水，则不要打开/开关。这样操作很容易破坏底座，而不能工作。

9. 如果在打开/关闭后发现瓶子无法工作，瓶子无法工作。请给瓶子充电，然后至少等待5分钟以上。

10. 水源水质必须为饮用水/纯净水/矿物质水/白开水/蒸馏水

包装清单:

智能LED吸氢杯T款*1

纳米美容喷雾补水仪*1

吸氢管*1

矿泉水吸氢转接器*1

USB充电线*1

精致礼品包装盒*1

英文说明书*1