Mô Đun Máy Phát Điện Áp Cao Bis 400kV DC 3V-6V Mô Đun Tăng Áp

This high voltage module is made using the principle of a Tesla coil. It outputs high voltage, high voltage pulse, small current, high efficiency and easy on the peripheral circuit. (Just connect the switch and battery) Input voltage: DC 3V-6V Input current: 2A-5A High voltage type: pulse current type Output voltage: about 200,000V (Please pay attention to safety when using) High voltage bipolar Discharge distance: 10mm-20mm High voltage wire length: about 100mm Input wire length: about 100mm (red wire is positive) Size : Φ24*64mmAbout power supply: You can use a 3.7V lithium battery. Single or double series, such as 18650 battery, idle mobile phone battery, recommended capacity is more than 2000mAh), or nickel-cadmium/nickel-metal hydride batteries, 4V or 6V lead-acid batteries, etc. This module is a finished module of High Voltage Inverter/Booster Transformer for Small Scientific Production After entering the DC3V-7.2V voltage at the input end, the DC voltage is about 200,000V high. (about 1-2 cm arc) can be obtained at the output end, please note that there is no wiring ignition function: the red wire is the positive pole of the power supply. Output 2 high temperature and high pressure resistant silicone cable