Dụng Cụ Sửa Chữa Vết Lõm Không Sơn Cho Xe Hơi Bộ Dụng Cụ Tháo Gỡ Búa Trượt Búa Đảo Chiều Dụng Cụ Có Giác Hút Thân Xe/Keo Dính Màu Xanh Dương

Car Paintless Dent Repair Tools Puller Removal Kit Slide Hammer Reverse Hammer Tool Body Suction Cup / Adhesive Blue Glue Tabs

Features:

1. The sliding hammer repairs dents more powerfully and conquers large dents.

2. The principle is to stick the film on the dent, pull the film with a tool, and lift the dent.

3. Large dents require a sliding hammer or puller; small dents require a mini dent lifter or pull bridge.

4. Different labels for different dent lifters or sliding hammers, suitable for all glue pullers.

5. Use a slide hammer or dent lifter or any pulling tool to lift the dent, try a few more times.

Specification:

color: White

Packing size: 41.5*11.5cm

Packing weight: 1050g

Package Included:

22* pull tab

1*T bar tool

Instructions:

1. Clean the dent with a clean damp cloth;

2. Put the glue stick into the glue gun, pull the trigger to let the glue stick enter the glue gun, turn on the power and preheat for 5 minutes;

3. Use suitable brushed spacers. Large dents require large brushed spacers.

4. Pull the trigger and apply the drawing gasket with extruding glue;

5. Quickly place the brushed gasket in the center of the dent with hot melt glue, and press gently until the glue is cured and bonded;

6. Align the T-shaped trimmer, press the wire drawing gasket with hot melt adhesive, and pull the slide bar back to pull up the dent;

7. Check with circuit board. If the dent remains, tap lightly with a flattening hammer or pen;

8. Clean the repaired area with a clean damp cloth.