[Hot K] ACK-E12 USB Power Bank TYPE-C Cable LP-E12 Dummy Battery DR-E12 PD Adapter Kit for Canon EOS M2 M10 M50 M100 M200 Cameras

★ High-quality chips,DC-DC converter,high Conversion Efficiency,Good Stability,Quiescent current is small,while also serving to Effectively Suppress Harmonic current noise.Using a wide range,Suitable for most 7.2V-8.4V and 9V camera.

★ The Power of the Mobile Phone PD charger must be between 18W -65W, The camera can start normally. Only support 18W 30W 45W 60W 65W PD Wall charger/PD mobile power supply/PD Car charger to power the camera, please do not use other devices, otherwise the camera will be damaged. This device is only used to power the camera, Do not connect other devices at the same time, Otherwise, it will cause insufficient power supply.

★ COMPATIBLE WITH: DR-E12 Dummy Battery Kit for Canon EOS M, M2, M10, M50, M100, M200 Digital Camera.

★ After connecting to the correct PD and QC3.0/4.0 power adapter or power bank, the red indicator light will always be on when the power is on. Certain models of cameras may consume higher current, so please use a high-performance power supply.

★ PACKING LIST：1 x ACK-E12 USB-C Cable，1 x DC Coupler DR-E12，1 x PD Adapter，1 x Manual

ACK-E12 PD Kit:

PD18W Power Adapter:
Input: AC100-240V 50--60Hz; 0.6A
Output:Type-C 5V/3A 9V/2.4A 12V/1.5A
Output:USB-A 5V/3A 9V/2.4A 12V/1.5A

USB-C Cable:
Input:PD 18W-65W
Output:7.6-9V 2-3A
length:120CM

Compatible with:
For Canon EOS M
For Canon EOS M2
For Canon EOS M10
For Canon EOS M50
For Canon EOS M100
For Canon EOS M200

Package Includes:
1 x USB-C Cable
1 x DC Coupler DR-E12
1 x PD Adapter
1 x Manual

1.The power of the mobile phone PD charger must be between 18W -65W, The camera can start normally.

2.Only support 18W 30W 45W 60W 65W PD Wall charger / PD mobile power supply / PD Car charger to power the camera, please do not use other devices, otherwise the camera will be damaged.

3.This device is only used to power the camera, Not a camera charger,Do not connect other devices at the same time, Otherwise, it will cause insufficient power supply.