3D Nhện thằn lằn Bọ Cạp nhãn dán xe 3D hoa văn động vật cửa sổ xe viền gương Đề can trang trí chịu nước cao

Description

• New three-dimensional car spider gecko animal car sticker, simulation car tail sticker, realistic modification sticker

• Cute and cool 3D animal design car stickers.

• Waterproof and sunscreen, long-term decoration of your car.

• High adhesion, easy to paste and remove.

• High-definition and realistic, the texture is clearly visible, and the transparent material is better integrated with the car.

Car sticker method description Small car sticker installation method (dry sticker method):

• 1. Clean the body and keep it dry.

• 2. Determine where to post. Under normal circumstances, slowly stick it on one side, scrape it flat with a tool, and peel off the bottom paper.

• 3. If the graphics are really small, you can also tear off all the transparent transfer film and stickers before attaching them. But you must be careful not to accidentally stick.

• 4. After it is pasted, scrape and press it again and again. Tear off the transparent transfer film.

• 5. Use a utility knife to draw a knife on the door and the sewing machine, and wrap it inward.

• 6. Don't let the car sticker and the body have any separation or protrusion.

Installation method of large car sticker (wet sticker method): Tools: rag, sprinkler, scraper or credit card

• 1. Clean the body, and evenly spray water on the body part to be pasted-to reduce the viscosity of the sticker and facilitate the adjustment of the position.

• 2. Determine where to post. Slowly stick it on one side, scrape it gently with a tool, and peel off the bottom paper.

• 3. When encountering door handles or anti-scratch strips, cut open the materials and pack them in according to the situation.

• 4. Make proper adjustments. After confirming the approximate position of the graphics, wipe off the water and air bubbles repeatedly. Tear off the transparent transfer film.

• 5. Make a cut with a utility knife on the car door and sewing, and stick it inward.

• 6. Don't let the car sticker and the body have any separation or protrusion.

• 7. Try to let the moisture in the car sticker dry, and if possible, it can be heated and dried appropriately. Depending on the weather, wash the car again after a day or two.

In order to reduce the installation difficulty for customers, the car stickers we provide have been covered with transfer film in advance. (Except for the whole block of continuous graphics)